Anhuang specialized in Insulated Protective Cap, we supply high quality Insulated Protective Cap. Our products accord with IEEE386, and IEC standards.
15/25kV 200A Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal load break bushing interfaces. When mated to a load break product and the drain wire is attached to ground, the Insulated Protective Cap provides a fully shielded. submersible insulating cover for energized bushings The Insulated Protective Cap can be used for permanent or temporary。Installation on 200A loadbreak bushings, junctions or insulated stand off bushing.
1、INSULATION: High quality, peroxide-cured EPDM rubber formulated, mixed and molded in-house for consistent and reliable field performance.
2、SEMI-CONDUCTIVE SHIELD: High quality EPDM rubber provides protective dead front shield that make sure they have grounding
3、GROUNDING EYE: Three tabs molded into a semi-conductive shield for the attachment of a ground wire to maintain dead front safety.
4、PULLING EYE: Stainless steel reinforced for positive shotgun stick switching operations.
| Description | Reference No. | Continuous operating voltage | Impact withstand voltage |
| 200A 15kV Insulate protective cap | AH JYM-15/200 | 15kV | 200A |
