Anhuang specialized in Deadbreak T Fore Connector, we supply high quality Dead break T Fore Connector.
●For connection of polymeric cable to transformers, switch gear, motors and other equipment with a pre-molded separable connector.
●For indoor and outdoor installations.
●System voltage up to 24 kV.
●Continuous current 630 A (900 A overload for 8 hours).
●Cable particulars:
– Polymeric cable (XLPE, EPR, etc.)
– Copper or aluminum conductors
– Semiconducting or metallic screens
– Conductor size 12kV 25-120 mm2 24kV 25-400 mm²
●Provides a fully screened and fully submersible separable connection when mated with the proper bushing or plug.
●Can be used under the circumstances
●Built-in capacitance test point to determine the circuit status or install a fault indicator.
●No minimum phase clearance requirements.
●Mounting can be vertical, horizontal, or any angle in between.
●When finish the installation of elbow connector, the power can be supply directly.
●According to the Installation Instruction Sheet
●(any other special requirement, please contact our sales engineer）
1 TWO HEAD SCREW: To make sure have a good contact with the apparatus bushing.
2、INSULATION: Molded EPDM insulating rubber is formulated and mixed in-house to ensure high quality.
3、INSULATING PLUG: Molded epoxy insulating plug provides excellent electrical,thermal and mechanical reliability.
4、SEMI-CONDUCTIVE INSERT: Molded EPDM conducting rubber screen controls electrical stress.
5、STRESS RELIEF: The configuration of the outer screen and the cable adapter provide cable stress relief.
6、GROUNDING EYE: Molded into the extremal screen for connection of an earthing wire.
7、SEMI-CONDUCTIVE SHIELD: Molded EPDM conducting rubber mates with the cable screen to maintain screen continuity and ensure that the assembly is at earth potential.
8、CONDUCTOR CABLE LUG: Aluminum compression connector is sized to ensure a cool running connector with maximum current transfer.
● Front T body
● Insulate plug
● Sealing cap
● Adaptor (stress cone)
● Crimp connector
● Stud bolt
● Silicone
● Cleaning paper
(any other special requirement, please contact our sales engineer)
| Reference No. | Conductor Cross Section(mm²) | stretch range over insulation(mm) | ||
| AH QJ-12/630-25 | 25 | 16.6 | ||
| AH QJ-12/630-35 | 35 | 17.6 | ||
| AH QJ-12/630-50 | 50 | 19 | ||
| AH QJ-12/630-70 | 70 | 20.6 | ||
| AH QJ-12/630-95 | 95 | 22.2 | ||
| AH QJ-12/630-120 | 120 | 23.6 | ||
| AH QJ-12/630-150 | 150 | 25.2 | ||
| AH QJ-12/630-185 | 185 | 26.7 | ||
| AH QJ-12/630-240 | 240 | 29 | ||
| AH QJ-12/630-300 | 300 | 31.2 | ||
| AH QJ-12/630-400 | 400 | 34.4 | ||
| AH QJ-12/630-500 | 500 | 37.2 | ||
| Reference No. | Conductor Cross Section(mm²) | stretch range over insulation(mm) | ||
| AH QJ-24/630-35 | 35 | 18.6 | ||
| AH QJ-24/630-50 | 50 | 19.6 | ||
| AH QJ-24/630-70 | 70 | 21 | ||
| AH QJ-24/630-95 | 95 | 22.6 | ||
| AH QJ-24/630-120 | 120 | 24.2 | ||
| AH QJ-24/630-150 | 150 | 25.6 | ||
| AH QJ-24/630-185 | 185 | 27.2 | ||
| AH QJ-24/630-240 | 240 | 28.7 | ||
| AH QJ-24/630-300 | 300 | 31.1 | ||
| AH QJ-24/630-400 | 400 | 33.2 | ||
