Bay-O-Net Assembly is the brief element of oil-transformer, to protect the equipment when over-current. When install the fuse wire in it, the Bay-O-Net will provide the safe, highly efficient protection,according to the current, oil-femperature. The Bay-O-Net Assembly is suitable for current sens...

Oil-filled two-position load switch is mainly used for terminal type American box change, with spring operating mechanism, is a three-phase linkage switch to complete the load breaking and closing operation. By the two-position load switch can also be composed of ring-type switching system for th...

1), the wiring form of American box change One or two 10KV incoming lines; a single transformer, the capacity is generally 500KVA~800KVA; 4~6 low-voltage outgoing cables. 2), the main components of the American box changer Transformer, 10KV ring network switch, 10KV cable plug, low-voltage pile h...

The wind power station is a special substation equipment that increases the voltage (0.6-0.69KV) from the wind turbine to 35KV or 10KV after connecting to the grid. The box transformer of the power station is an ideal supporting product for the wind power generation system integrating reliability...

I. Overview HXGN-12 box-type fixed AC metal-enclosed ring network switchgear is suitable for AC 50HZ, 10KV network as breaking load and short circuit and closing short circuit current. The ring network cabinet is equipped with manual and electric spring mechanism to operate the load switch , The ...

Solid insulation ring network cabinet, as the name implies, is a ring network cabinet that uses solid insulating material as the main insulating medium. The dielectric encapsulation is one or several modules with a certain function, which can be combined and expanded again with full insulation an...

Loadbreak switch is suitable for three-phase AC 50Hz, rated voltage 12kV ring network power supply or dual-radiation power supply system, used to switch and switch load current and overload current, and can also be used to switch and switch no-load long lines. No-load transformers and capacitor b...

630A 24kV Deadbreak T Rear Arrester and 24kV 630A Deadbreak Cable Connector provide reliable overvoltage protection for electrical equipment Product structure Insulation layer: special formula and mixing technology to ensure the high quality of prefabricated insulating rubber; Outer semi-conducti...

The plug-in devices currently used in the high-voltage cable distribution box in our country are divided into two series: European and American. European-style devices refer to the cable connection concept of outdoor box-type substations introduced from Europe in the 1980s to the field of cable b...

12KV high voltage cable branch box operating conditions environment: 1. Altitude ≤3000m; 2. Ambient temperature: +55℃~ -45℃; 3. The average daily relative humidity does not exceed 95%; the average monthly relative humidity does not exceed 90%; 4. Earthquake resistance: 8 degrees; 5. There is no v...

The cable branch box with SF6 load switch adopts a three-station SF6 load switch combination, cleverly separated left and right input and output lines, good structure design, strong cable configuration function, and up to 8 lines of input and output. This branch box not only retains the advantage...

The biggest feature of heat-shrinkable cable joint accessories is the use of stress tubes instead of traditional stress cones. It not only simplifies the construction process, but also reduces the size of the joint terminal, which is convenient to install, save time and labor, has superior perfor...