Casting type cable accessories use thermosetting resin materials, cast on-site in the mold or box body at the end of the cable or the joint after the treatment, and the cable accessories are formed after curing. Especially suitable for the interconnection of plastic extruded insulated cables and ...

The installation of the cold shrinkable cable accessories does not require special tools, which is simple and quick.It does not require fire, and is safe and reliable. There is a long-lasting radial pressure on the cable body, which “breathes” with the cable, and has good sealing and ...

The product introduction of 10KV cable branch box is as follows: The 10KV cable distribution box adopts a high-performance SF6 load switch with SF6 insulating gas inside and a touchable shielded silicone rubber cable joint. It has a strong active load and no-load current breaking capacity, and ca...

Cable Branch Box The main parameters This device is widely used in 10/35kV power cable systems. It is widely used in power systems due to its fully sealed, fully insulated, maintenance-free, corrosion-resistant, compact structure, easy installation, safe and reliable, and high electrical paramet...

A sensor is a detection device that can feel the information being measured, and can transform the sensed information into electrical signals or other required forms of information output according to a certain rule, so as to satisfy the transmission, processing, storage, and display of informati...

Insulator is a special insulation control device which can play an important role in overhead transmission lines. In the early years, insulators were mostly used for telegraph poles, and later they gradually developed into the high-voltage wire connecting tower with a lot of disk-shaped insulator...

Cable terminal heads and intermediate joints are important components in power transmission and transformation cable lines. Their function is to disperse the electric field at the cut-off part of the outer shield of the cable terminal head, protect the cable from breakdown, and have internal and ...

The cable plug head mainly includes three parts: branch gloves, semi-conductive tube (stress tube), and insulating sleeve; the elbow joints seen in switch stations and box transformers are actually equivalent to insulating sleeves. Of course, equipment manufacturers will Equipped with a semi-cond...

When the high-voltage cable branch box heats up, it is controlled according to certain methods and methods to ensure that it will not be affected to a certain extent in the actual treatment, and affect the operation and value in actual use; first, perform temperature monitoring, according to the ...

What is the difference between the front connector and the rear connector of the Deadbreak connector! Generally speaking, under normal circumstances, a set of front connector are needed to enter a three-core high-voltage cable in a ring main unit. If it is connected through a wall bushing,after i...

The function of the surge arrester is to protect various electrical equipment in the power system from damage caused by lightning overvoltage, operating overvoltage, and power frequency transient overvoltage. The main types of lightning arresters are protective gaps, valve arresters and zinc oxid...

There are many forms of cable connectors, and different forms have their own characteristics. Among them, the Deadbreak cable connectors are fully insulated and fully sealed terminal cable heads that can be touched with electricity; they are widely used in outdoor distribution transformers, box t...