You can know every new products be published here, and witness our growth and innovation.
Date：08-31-2021
1, Appearance shape: T Cable Connector is commonly referred to as the middle branch of the cable, T Cable Connector is from a cable, branch out of a cable, the shape of the joint like T shaped;
Elbow connector is different from ordinary cable connector, it’s like elbow.
2, Function and Use: T-type cable connector as the main cable connection, at the same time in the tail can also be connected with the elbow plug, increase the number of incoming and outgoing cables, can also be installed elbow arrester as equipment protection, can also be installed grounding elbow, equipment and cable maintenance;Elbow cable connector is used in ring cabinet or box transformer, if there is only one cable connector, the same elbow cable connector can be used.
Precautions for cable joint installation:
1, conductor connection conductor connection requires low resistance and enough mechanical strength, the joint can not appear sharp Angle.
Medium and low voltage conductor connection is commonly crimped.
2, choose the appropriate conductivity and mechanical strength of the conductor connection tube.
3. The fit gap between the inner diameter of the pressure pipe and the outer diameter of the connected wire core is 0.8 ~ 1.4mm.
4. The resistance value of the crimped joint should not be more than 1.2 times that of the constant section conductor, and the tensile strength of the copper conductor joint should not be less than 60N/mm2.
5. Before crimping, the outer surface of the conductor and the surface of the connecting tube are coated with conductive adhesive, and the oxide film is destroyed with a steel wire brush.
6. The sharp corners and burrs on the connecting pipes and conductors should be polished smooth with a file or sandpaper.
